Toaster held up the Pickaxe and shouted "STRIKE THE EARTH! This is a weapon! What do I win?"
Only if you can reliably hit a target from a distance with it.
Use tank 18876 with card WJ9842.
It produces a small lead meat cleaver.
Perhaps its i dunno... unset or liquid fiberglass?
Set my current build aside for now.
Mix 278378, 2112 and 276456 in the reaction chamber. IN CON EJ.
Build the following using a 3->1 hose and a spike hose ending with the tanks connected last.
Hexagons-v
Tank 1-\ |--------|
Tank 2 --trigvalve--| bigbox|-[]=>
Tank 3-/ |________|
Cylinders-^
Connect 4 hexagons
Connect 4 cylinders
Activate only first hexagon, pull trigger.
Activate only first cylinder, pull trigger.
Activate both first slots, pull trigger.
Alright lets see if we get this right. There are actually only 4 kinds of hexagons right now, so good guess.
Those three eh? Thats gonna be fun.
You put them through the reaction chamber, in, con and ej. Then you bind the tanks to a 3-1 hose, with a trigger valve and then finally to the larger box with all the ports on it. You connect all the pieces and switch on the first hexagon, which has a marking like this "=>" on the top.
Nothing happens when you pull the trigger.
(hint, the big box ends in a spike nozzle. Spike nozzles don't release things, they're just connector parts. Try a different end piece. Otherwise, you're there.)
Tank 83216 and card TI3711
This combination spews out what appears to be a dense mist of blood. This mist sort of hovers in pace, staying mostly condensed like a tiny cloud. It doesn't disperse, but it does start moving around the room in a slow drifting motion.
Public list has been updated with those changes.
Grab tank 276456 and card LT1634 and set them aside. Grab a "hockey puck" device. Attach them as such, from LEFT TO RIGHT:
Tank [276456] -> Hockey -> Printer [LT1634]
If it won't fit, see if there's a hose that'll make the connection work. Leave all puck dials at default position, and try to make another pickaxe. Afterwards, turn every single dial up a quarter turn and try again.
Ok, getting and setting aside. Hockey puck, alright. Lets call the Hockey Puck a Projector, shall we?
The Projector won't connect to the printer, unfortunately. The projector has a port for you to route a hose into it, but none for routing out. The projector and the Printer have many in ports, but no out port, beyond their physical output through the lens.
Repeat process for the next card and the one after than until I run out of cards or tank.
WO3240
DL3489
They give you a simple geometric solid, a cone, specifically, and a small diamond chair.
You're out of tank and cards now.
Author
Topic: A peculiar lab: 40% chance of survival and dropping. (Read 30039 times)