Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[TroZ_shack]

I not a Linux guy, and I'm still having some issues setting up the project. 
I renamed the directory that has my other perl installation in (used by another linux utility I occasionally use), and installed Strawberry Perl.  I then added c:\strawberry\perl\bin to my path.

Attempting to then setup LibXML give me this error:

Spoiler (click to show/hide)

C:\Users\TroZ\git\dfhack\build>cpan XML::LibXML
CPAN: CPAN::SQLite loaded ok (v0.202)
Database was generated on Sun, 04 Mar 2012 23:39:05 GMT
Running install for module 'XML::LibXML'
Running make for S/SH/SHLOMIF/XML-LibXML-1.94.tar.gz
CPAN: Digest::SHA loaded ok (v5.63)
CPAN: Compress::Zlib loaded ok (v2.042)
Checksum for C:\strawberry\cpan\sources\authors\id\S\SH\SHLOMIF\XML-LibXML-1.94.
tar.gz ok
CPAN: Archive::Tar loaded ok (v1.80)
CPAN: File::Temp loaded ok (v0.22)
CPAN: Parse::CPAN::Meta loaded ok (v1.4401)
CPAN: CPAN::Meta loaded ok (v2.112621)
CPAN: Module::CoreList loaded ok (v2.57)

  CPAN.pm: Building S/SH/SHLOMIF/XML-LibXML-1.94.tar.gz

enable native perl UTF8
Use of uninitialized value $config{"LIBS"} in pattern match (m//) at Makefile.PL
 line 283.
looking for -lxml2... system call to 'dmake test OTHERLDFLAGS=' failed at Makefi
le.PL line 508.
system call to 'dmake test OTHERLDFLAGS=' failed at Makefile.PL line 508.
no
looking for -llibxml2... system call to 'dmake test OTHERLDFLAGS=' failed at Mak
efile.PL line 508.
system call to 'dmake test OTHERLDFLAGS=' failed at Makefile.PL line 508.
no
libxml2, zlib, and/or the Math library (-lm) have not been found.
Try setting LIBS and INC values on the command line
Or get libxml2 from
  http://xmlsoft.org/
If you install via RPMs, make sure you also install the -devel
RPMs, as this is where the headers (.h files) are.

Also, you may try to run perl Makefile.PL with the DEBUG=1 parameter
to see the exact reason why the detection of libxml2 installation
failed or why Makefile.PL was not able to compile a test program.
No 'Makefile' createdCPAN: YAML loaded ok (v0.77)
  SHLOMIF/XML-LibXML-1.94.tar.gz
  c:\strawberry\perl\bin\perl.exe Makefile.PL -- NOT OK
Running make test
  Make had some problems, won't test
Running make install
  Make had some problems, won't install
Could not read metadata file. Falling back to other methods to determine prerequ
isites

I'm assuming that I don't have something setup correctly, or that I need to reboot after installing Strawberry Perl (the install didn't say anything about rebooting).  I'll reboot in a little while, I'm downloading somethign in the background right now, but in case it is a config issue and won't be fixed by rebooting, I'm posting in the hopes that you can help me out.

Thanks.

[peterix]

I'm not sure what's happening there... could be some path issue, could be something completely different interfering. If you had an existing perl install, it should've worked just fine. Anyway, join us on IRC: http://webchat.freenode.net/?channels=dfhack&uio=d4

[DVeL]

From Blah

"You can make a macro that sets up all the uniforms you want."
My hack requests for uniforms was so I could mix and match Leather Headwear and Metal Leggings for example.
It would be nice if dhack would allow me to create a uniform that would allow me to import this non selectable Headware option.

Any word from DFHack developers about getting access to "headgear", "armor", "footgear" and etc. except for default uniform templates?
Or some way to save and keep uniform templates from one fort to another?
Because i couldn`t find uniform profile (like "embark profile" or something), and it seems they are hidden and stored somewhere deeper than i can reach personally =(

[acetech09]

I know there isn't a command for it - but is there some obscure way to detect vampires with DFhack? I'm trying to do a megabuild with superdwarves and hate losing a good laborer to a vampire.

[robertheinrich]

(topic: changevein does not affect horn silver)

Horn silver is most definitely a mineral, so it ought to be detecting it. What's the exact error message you're getting?

I am getting no error message at all. I set a cursor at a veign with horn silver. Then type  changeveign GRANITE  (actually I set it to a key with keybinding set F9 "changeveign GRANITE"  but I tried it manually, too. DFHack accepts the input without an error, but ingame the veign/cluster stays horn silver.

[Azure]

Searched the last couple pages and didn't see anything regarding the reinclusion of DFlair. Does anyone know when DFlair will be re-included so we can avoid cluttered reclaims?

[thatkid]

Searched the last couple pages and didn't see anything regarding the reinclusion of DFlair. Does anyone know when DFlair will be re-included so we can avoid cluttered reclaims?

I actually asked basically the same question a few pages back. No answer.

We're left to assume that it simply isn't going to happen. Good luck.

[Azure]

Spoiler (click to show/hide)

Searched the last couple pages and didn't see anything regarding the reinclusion of DFlair. Does anyone know when DFlair will be re-included so we can avoid cluttered reclaims?

I actually asked basically the same question a few pages back. No answer.

We're left to assume that it simply isn't going to happen. Good luck.

Well I hope they notice how useful it is and put it back in. It made embarking to those really crazy site bearable. Not having to spend 4 years hauling all my crap back to where it should be cause a Tribe of Elk Birds Raid my fort for all my Masterwork Steel Breastplate and Lapis Lazuli stores would be apreciated.

[danaris]

I know there isn't a command for it - but is there some obscure way to detect vampires with DFhack? I'm trying to do a megabuild with superdwarves and hate losing a good laborer to a vampire.

I don't know of one with DFHack, but with Dwarf Therapist, you can check for the name of a particular dwarf, and see if it's there. If you have a dwarf in DF whose name doesn't show up in DT, that's a vampire.

You can pre-screen in DF by checking for dwarves who have high starting social skills, and who are "former members" of a couple dozen different sites.

[MagmaSolutionsInc]

I know there isn't a command for it - but is there some obscure way to detect vampires with DFhack? I'm trying to do a megabuild with superdwarves and hate losing a good laborer to a vampire.
[/quote

Would be nice to have a few options for vampires and lycanthropes. Some kind of magic bullet as an option.

[Rumrusher]

I know there isn't a command for it - but is there some obscure way to detect vampires with DFhack? I'm trying to do a megabuild with superdwarves and hate losing a good laborer to a vampire.

use Dwarf therapist for detecting vampires,
Disposing them... well their more useful alive than dead.
"The best is to isolate them and use DFliquids to seal them up, or use them for removal of unwanted guess in secret"

[janglur]

New DF is out.  Time for update!

[Terratoch]

Massive memory leak and a potential resolution:

I've been playing using DF Hack and noticed a massive climb in memory usage by the program when I've been using fastdwarf.

Interestingly, the memory spike is removed when turning fastdwarf off and then back on again.

Just a tidbit in case anyone else has this issue.

[Rumrusher]

New DF is out.  Time for update!

But it's a(fun exciting features someone reported as) bug fix patch.

[NecroRebel]

I know there isn't a command for it - but is there some obscure way to detect vampires with DFhack? I'm trying to do a megabuild with superdwarves and hate losing a good laborer to a vampire.

Save, load, go down to the lowest z-level of your map, liquids, w, range (big enough to get everything, everywhere), ENTER. Fills the whole fort with water. Anyone who doesn't immediately start drowning is a vampire. Then, once most of your people have drowned to death, pause again, check the last few survivors for vampirism, then kill DF. It's not exactly a direct method of using DFHack for vampire detection, but it seems reliable.