Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Empty]

My laser only continuesly fires if you keep the a waldo on.
Also you now run the risk of collision.

[Tylui]

I do? How's that?

[Empty]

I do? How's that?

Oh wait never mind.

Did not trace it correctly


Anyway the boss on planet 7 is hard.

If only I could use an extra reactor.

[Tylui]

I'm still stuck on Accidents Happen. Mostly because I decided to back and do KOHCTPYKTOP. Very hacky, but I finally did it!

[KrunkSplein]

I'm still stuck on the optional production level on the third planet.  I'd post screens, but I'm stuck at work and would frankly be embarrassed at this point.

[Silfurdreki]

Thanks for the help with More than machine, it was really easy when using the principle behind your third reactor. For some  reason bonding together 3 AlO molecules had never occurred to me, I only bonded two together. 

[KrunkSplein]

Okay, finally finished the Danopth challenge mission, but I'm over the average on both cycles AND symbols.  Any tips?  I'm fairly certain it's Reactor B that's my problem.

Spoiler (click to show/hide)

Overview:


Reactor A:


Reactor B (ewww):


Reactor C:

[Empty]

I'm stumped by the 7th "planet" boss.

The end product is 36 points (9+9+9+7)+(1+1)
But your input is in 10 points (1+1+1+1+6)

So on the last loop you have 4 molecules excess and no recyclers.

[Urist McBusDriver]

Empty, did you notice the bit where you're required to produce hydrogen-gas too?

My solution to the 7th-planet boss (right, where does this forum keep its spoilertags)

Spoiler (click to show/hide)

ah here we are.

I used three reactors.

Reactor 1 takes CH4 and delivers it to Reactor 3, unless I turn on Command A, when it sends it to Reactor 2.
Reactor 2 takes CH4 and sends it to the 'rotate laser clockwise' (labelled 1), unless I turn on Command B, when it sends it to 'rotate laser counterclockwise' (label 4).
Reactor 3 synthesises NF3 and H2 from CH4 and delivers it to the laser. The H2 goes via a storage tank.

This is the workflow for synthesising NF3:

Blue gets a CH4 and fuses it to HF. It drops the F and puts the H in a little H2-forming microfactory*
Red gets CH4, fuses it once to make NH3. Bonds with F, drops a H.
Blue collects the H and drops it in the H2 microfactory, then makes another HF
We loop until Red has collected three fluorines and dropped three hydrogens
Red drops the NF3 and the cycle starts again.

Then it's just a matter of sending CH4, one or two molecules at a time, to the aiming controls. There's no need to moderate the NF3 factory - it will happily produce quickly enough to keep the laser fully charged.

*(the bond-drop-grab-drop-flush sequence - or in this case bond-drop-flipflop(flush) - for automatically making H into H2 and then getting rid of it)

I was very very pleased with myself when I got all that to work!

Now I'm stuck trying to figure out how to send a waldo through a loop six times in a row, then on the seventh to go somewhere else but leaving all the flipflops in normal state.

[Empty]

I did that level differntly.

Spoiler (click to show/hide)

In reactor 1 I send 1 methane to reactor 2 and turn methane into 1 nitrogen, 3 Florine and 3 h2's which I send to reactor 3
reactor 2 has an infinite loop after  grabbing a methane which he can get out of in two ways determined by waldo a and b. Waldo a turns the laser clockwise and b the opposite direction.
reactor 3 continually assembles the nf3 and also sends trough the h2's which causes the laser to fire almost constantly.

This way I only have to care about the targeting.

And yeah I'm also having problems with getting flip flops to work on odd numbers.

[Urist McBusDriver]

I solved my flipflop problem but can't explain how in text and can't see where I would upload an image. In any case I'm going to bed now. Getting quite frustrated failing to build Ω-pseudoethane...

[Empty]

When in doubt use imageshack!

[eerr]

Why do I do this to myself...


Trying to solve danopth(optional) with two standard reactors.

The plan is to crack everything in the first, (done, pain in the ass) and for the second, to recombine it.(not started, probably also pain in the ass)

[breadbocks]

I solved my flipflop problem but can't explain how in text and can't see where I would upload an image. In any case I'm going to bed now. Getting quite frustrated failing to build Ω-pseudoethane...

imgur.com
Best. Image site. EVAR.

[forsaken1111]

I solved my flipflop problem but can't explain how in text and can't see where I would upload an image. In any case I'm going to bed now. Getting quite frustrated failing to build Ω-pseudoethane...

imgur.com
Best. Image site. EVAR.

Not quite as good as dropbox.
Imgur is nice but dropbox doesn't do anything to your image that you might not want, like compression or conversion.