Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[timmeh]

That works, but only if you never want scrolling maps, or different kinds of floor tiles, or a number of other things.  Now, the dirty thing could work, keeping a vector/list of the cells that have changed, but as Blacken pointed out, premature optimization is a really bad idea, so your best bet is just not to worry about it.  Like you said, it's curses, it's not like the drawing code is often the source of a slow program as far as rogue-likes are concerned....

[EDIT]: Yes, I realize you could probably fix it to work with those things, but it'd require that you go back and change it.  It's far easier just to write the drawing code how you want it to work, and optimize it only after you know that the basics aren't going to change any more.

[Blacken]

[EDIT]: Yes, I realize you could probably fix it to work with those things, but it'd require that you go back and change it.  It's far easier just to write the drawing code how you want it to work, and optimize it only after you know that the basics aren't going to change any more.

Optimize it only when you actually need the performance improvement, you mean.

[timmeh]

Good point.  Which with a rogue-like really isn't too likely; at least, not from the drawing code.  AI, path-finding, or something similar can get rather slow if you're not careful, but the drawing shouldn't be an issue.

[Outcast Orange]

I can agree with this.
It becomes much more applicable in a 3D application to mess with the draw code,
 but it is not the first place to look for speed boosting.
I rewrote my water physics at least twice to get everything running faster.
At first it couldn't even support the moving water without the frame rate dying,
 but now it supports water, no-lag cave-ins, shadows, and all sorts of stuff.

[Kazang]

While it is a very good idea to know how to implement things like this when programming, using a framework like Visual Studio (assuming you're on windows) can help cut out a lot of the time consuming legwork and makes the job a lot easier.

Learn the principle sure, it's important to do that.  But don't spend large amounts of time writing and using outdated drawing methods, it really is counter productive as you will likely want to replace it with a better system later on.  Example: the huge amount of time and effort it takes toady to merge a basic openGL sdl with his display code.  Unless you want to use curses for purely aesthetic purposes and are not planning to go beyond it in your program, I recommend "skipping" stuff like this in favour of better and more modern methods.

Just thought I would point that out.

[Blacken]

Visual Studio isn't a framework. It's an IDE. That said, yes, it's pretty much the best one out there for C++ development.

And there are a lot of libraries out there that take care of the stupid gruntwork of writing a roguelike. libtcod is horribly designed, but probably the best thing out there right now if you are bound and determined to use C or C++.

[Rotten]

Well, I hate to bump an old thread with another of my stupid questions, but I spent a day staring at this but everything I do doesn't work.
Basically, I'm writing a loop to dump an array to the screen.

Code: [Select]

int maprows=24;
int mapcols=79;


Code: [Select]

   while (Quit == false)
    {
        int currow=0;
    int curcol=0;

        int MapArray[24][79] =
        {
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0},
        };

        while (currow < maprows)
        {

            while (curcol < mapcols)
            {
                printw(MapArray[currow][curcol]);
                ++curcol;
            }
            ++currow;
        }
[after this is just input stuff which already works fine]
Now here's the error it gives:
line 59 (printw(MapArray[currow][curcol]);)- invalid conversion from int to 'const char*'
This is how the learncpp tutorial handled array loops (I checked to see if I had done anything wrong), minus that I'm using printw instead of cout. Changing the variables to char values gives the same error, even though they aren't integers. What.
 

[darius]

printw is designed to work with strings....
from help:

int printw(fmt [,arg...])
char *fmt;

so it's formated printing function. If you want to print one char with it (although this is strange and not recommended) but you can do it like this:
first change array to char. Then use printw("%c",MapArray[currow][curcol]); Although i'm not sure if it will print 0 char (because it's string termination sign).
Maybe it would be possible to print all the line in one go? something like:

Code: [Select]

while (currow < maprows)
        {
            printw("%s",MapArray[currow]);
            ++currow;
        }
Not sure if it would work, but still it will not accept 0 chars and up to 31 could work funny AFAIK.

Edit: also can't understand why learncpp teaches to use while's for loops. In my view for's are better because you don't need to define counts in the start:

Code: [Select]

for (int currow=0;currow < maprows;currow++)
            for(int curcol =0; curcol < mapcols;curcol++)
                printw("%c",MapArray[currow][curcol]);

Well now that i look at it maybe it's a bit more complex...

[Blacken]

Now here's the error it gives:
line 59 (printw(MapArray[currow][curcol]);)- invalid conversion from int to 'const char*'
This is how the learncpp tutorial handled array loops (I checked to see if I had done anything wrong), minus that I'm using printw instead of cout. Changing the variables to char values gives the same error, even though they aren't integers. What.

OK. So did you read the error message? You are attempting to convert an integral value into a const char*. That's not going to be a conversion that's going to get you any results (because a pointer of 0 is the null pointer, and you will segfault). Neither is a char a const char *.

I think you need to do a little more reading about your type system. I could give you the answer, but I'd rather see you figure out what the problem with your conversion is (and darius's method may work, but is decidedly suboptimal; I'd look at why you're having trouble instead of just trying to cargo-cult his code).

[Rotten]

Actually, I ended up finding a solution a little while after posting this. I just used Word to mass-replace all the 0's with 46's, changed the array to char and replaced printw with mvaddch. Working fine (well, sort of. There is a bug where it only prints 10 .'s, but at least it starts now...). Thanks for helping, though.

Neither is a char a const char *.

Yeah, you're right. I don't really see the point of a const char though? The page I read (after googling) made it sound like a variable that cant be changed.

Code: [Select]

# const char cc = 'A';
# char c = 'B';
# 
# c = 'C';    /* Legal */
# 
# cc = 'Z';   /* will cause a compiler error because it is constant */

What's the point?

[Blacken]

You will probably never instantiate a const char*. Look at what the semantics of const mean in a function declaration.

[darius]

Actually, I ended up finding a solution a little while after posting this. I just used Word to mass-replace all the 0's with 46's, changed the array to char and replaced printw with mvaddch. Working fine (well, sort of. There is a bug where it only prints 10 .'s, but at least it starts now...). Thanks for helping, though.

Neither is a char a const char *.

Yeah, you're right. I don't really see the point of a const char though? The page I read (after googling) made it sound like a variable that cant be changed.

Code: [Select]

# const char cc = 'A';
# char c = 'B';
# 
# c = 'C';    /* Legal */
# 
# cc = 'Z';   /* will cause a compiler error because it is constant */

What's the point?

Thats only for declarations. If function has const in its arguments it means that "I swear not to change stuff there" e.g

Code: [Select]

f(int *x); can change the value of x;
f(int const  *x); will not change x;


Spoiler (click to show/hide)

there is also difference between  const int *x and int const *x and int * const x or something but I don't remember this.

as for changing all values, i suggest using loops (way faster IMHO)