Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Doomblade187]

Proposal A: (5) eS, Iridium, Maxim, TFF, Doomblade
Proposal B: (1) UristMcRiley

[Doubloon-Seven]

Proposal A: (6) eS, Iridium, Maxim, TFF, Doomblade, D7
Proposal B: (1) UristMcRiley

Made the box title actual words.

[Doomblade187]

"Biche" General Military Shotgun

The Biche is a 15mm smoothbore shotgun with a 6 round tube magazine. It can load two types of wax paper shells, described below. The action of the shotgun uses a modified lever system from the Nouveau carbine, but instead of a lever being used to actuate the mechanism, a slide mounted on the underside of the tube magazine via two greased rails and a lock tied to the bolt is used. The gun boasts unadjustable sights zeroed out to 100m.

Shells:

15mm "Crowd Clearer" shell: this shell is a 50mm long brass shell loaded with 5 large shot balls and a sizable powder load.

15mm "Dart" shell: this shell is a 50mm long brass shell loaded with a 10mm diameter lead dart with two thin wooden discs  around the shaft to ensure straight flight.

[evictedSaint]

FR No.2.a Shotgun "Chili Bowl"

The FR No.2.a Shotgun "Chili Bowl" is a fully automatic 12-gauge shotgun.  The gas-operated system automatically primes the hammer, ejects the shell, loads in the next shell of the 30-round drum magazine, and releases the hammer.  It is through this process a single pull of the Chili Bowl's trigger will result in thirty shotgun blasts in the span of ten seconds.  In order to cut costs, the Chili Bowl does not feature a stock, nor a safety.

[Doomblade187]

"Aren Wagner" Military Sidearm

A beeg weapon for the discerning officer, the "Aren Wagner" is a gas seal actiated revolver chambered in 10mm carbine rounds, fitting 8 in the cylinder. The barrel is a sturdy 250mm long, and is furnished on the underside with lovely oiled wood furniture. The handle is elegantly curved, with all the metal hardware die-forged and machined to fit specification from cast forms, to provide superior quality of material over our standard cast and finish process. The revolver hammer forms a sightpost between two barrel notches, and the weapon can *easily* be used as a club and still function.

10mm Carbine Cartridge: 50mm long, brass, and pointed with a boat-tail finish. Smokeless powder.

Edit: Non-Memetastic

"Aren Wagner" Military Sidearm

A beeg weapon for the discerning officer, the "Aren Wagner" is a gas seal capable, mechanical/gas actuated revolver chambered in 10mm carbine rounds, fitting 6 in the cylinder. The cylinder does not reload through a swing-out mechanism, in order to ensure proper seal of the cylinder to the barrel. A small gas capture channel is hidden by the wooden barrel furniture, and assists in cylinder actuation. The barrel is a sturdy 20cm long, and is furnished on the underside with lovely oiled wood furniture. The handle is elegantly curved, with all the metal hardware die-forged and machined to fit specification from pre-cut steel blanks, to provide superior quality of material over our standard cast and finish process. The revolver hammer forms a sightpost between two barrel notches, and the weapon can *easily* be used as a club and still function.

10mm Carbine Cartridge: 30mm long, brass, and pointed with a boat-tail finish. Smokeless powder.

[Doomblade187]

"Biche" General Military Shotgun (Revision)

The Biche is a 15mm smoothbore shotgun with a 6 round tube magazine. It can fire brass 15mm shells. The action of the shotgun uses a modified lever system from the Nouveau carbine, but instead of a lever being used to actuate the mechanism, a slide mounted on the underside of the tube magazine via two greased rails and a lock tied to the bolt of the gun. The gun boasts unadjustable sights zeroed out to 100m, and has a bayonet lug at the front where a simple combat knife can be attached below the barrel.

Shells:

15mm "Crowd Clearer" shell: this shell is a 50mm long brass shell loaded with 5 large shot balls and a sizable powder load.

Loan ideas: We need 20 credits to do this exact thing. If we want, we can try and loan out a second assembly line with our prestige.

Revision: Nouveau 1.c
The Nouveau 1.c is our first modern weapon, and we have updated our manufacturing  to ensure proper quality. The action is made using improved manufacturing techniques to die-forge the components, which will result in smooth, consistent handling and tight tolerances. Additionally, we will make a new alternative weapon sight for close quarters environments, with a more open notch and post sight.

Nouveau 11 Smokeless
Similar in design to the 11mm cartridge we currently use, the Nouveau 11mm smokeless cartridge has no rim, and sports a boat-tailed bullet that will improve aerodynamics. The powder charge is now smokeless powder, resulting in much more kick and power.

[evictedSaint]

No Designs, No Revisions: (1) eS

[Doomblade187]

No Designs, No Revisions: (1) eS
eS is wrong, Design 11mm Smokeless and Revise the 1c: (1) Doomblade

[evictedSaint]

That action would completely wipe out our bank, doom. 

[Doomblade187]

That action would completely wipe out our bank, doom.

And?

No Designs, No Revisions: (1) eS
eS is wrong, Revise the 1c: (1) Doomblade

[Maxim_inc]

No Designs, No Revisions: (2) eS, Maxim
eS is wrong, Revise the 1c: (1) Doomblade

[Maxim_inc]

FR No.2.a Machine Gun 'Wiel': The ‘Wiel’ is the newest revolutionary design for machine guns. Feeding the regular 11mm round as our carbine from a 200 round canvas belt or 75 round metal feed strips. The belt/strip is inserted into the right side of the gun and the weapon is charged to load the first round by the loader simply rotating the flywheel with his hand. The furniture of the weapon is simple metal with a L shaped metal tube handle possessing a trigger. There is an optional stock that can be screwed into a small hole at the bend of the handle, the stock being made out of wood and designed to fit comfortably into the shooter’s shoulder to increase control. Great care is put into ensuring the quality of the action and of the spring with the former of die forged machine finished parts and the latter of quality steel.

There is also a carry handle, also wood, located on the barrel of the weapon which can also be used to remove and change the barrel. The barrel underside itself is lined down three-quarters of it’s length with steel half fins to disperse heat from the barrel to prevent overheating. The sights is a forward post sight with a rear ladder sight ranged from 100 to 1500 meters.

The action of the gun is a gas-operated lever action system, though instead of a typical lever it's a small teacup plate sized flywheel attached to a spring. As the 11mm round passes through the barrel a small amount of it’s gas is diverted through a small hole and directed onto a small cup on the side of the flywheel, the resulting force causes the flywheel to spin and tighten the spring which moves the action and ejects the spend round to the left out of the gun before loading a new one as the energy of the action ceases and the flywheel spins back into place under the pressure of the compressed spring ready to repeat the process again. The operator is protected from the flywheel by a small cover that encloses the entirety of the flywheel save for it’s external cup.

The mount for the ‘Wiel’ is a simple tripod that can either have it’s movement axis locked into place and moved with small ratchet screws for precise directional fire or unlocked for a free range of movement. In order to prevent over-stressing of the spring and to keep the recoil from shaking the gun too much the fire rate is artificially capped at 350 rpm by a small limiter screw which slows the rotation of the flywheel, the rpm of the ‘Wiel’ can be made even slower or faster by simply loosening or tightening the screw up to a maximum fire rate of around 780rpm. The Flywheel and spring can be easily replaced by removing the Snap-On cover and replacing the two parts, the cover having a cut-out as to not get caught on the fly-wheel's cup.

The machinegun is designed to be cheap to produce while prioritizing reliability.

[Maxim_inc]

No Designs, No Revisions: (1) eS
eS is wrong, Revise the 1c: (1) Doomblade
FR No.2.a Machine Gun 'Wiel': (1) Maxim

[UristMcRiley]

No Designs, No Revisions: (2) eS, UristMcRiley
eS is wrong, Revise the 1c: (1) Doomblade
FR No.2.a Machine Gun 'Wiel': (1) Maxim

Reckon were better off to sit on our hands this turn aint got the money to spend on it

[Powder Miner]

No Designs, No Revisions: (3) eS, UristMcRiley, Powder Miner
eS is wrong, Revise the 1c: (1) Doomblade
FR No.2.a Machine Gun 'Wiel': (1) Maxim

DONT DO SHIT, CAPN