Bay 12 Games Forum

Please login or register.

Login with username, password and session length
Advanced search  
Pages: 1 ... 12 13 [14] 15 16 ... 51

Author Topic: Mad Arms Race - Aratam Design Bureau (Fall 1965 - Final Design Phase)  (Read 60728 times)

Talion

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #195 on: February 19, 2018, 10:49:22 am »

SynthOil improvement ideas.

Tesla Radiator
A problem with the existing SynthOil battery is that the batteries is that we are not able to store as much energy inside the SynthOil as we theoretically should. As the SynthOil is incrementally charged it grows increasingly resistant to further charging.
Based on the technology used to produce the Tesla Rifle, the Tesla Radiator is a compact device that converts energy into radiation compatible with SynthOil charging. The Radiator solves the charging problem using the principle of a short sharp shock. This allows SynthOil to be charged extremely rapidly to higher levels of charge.

SynthOil Crystallization
Utilising a copper-nickel catalyst it is possible to grow energized SynthOil into a crystal. This crystal compactly stores energy in a solid state, not prone to discharging. When placed in contact with uncharged SynthOil, the crystal dissolves; the excess energy previously locked into the crystal redistributing into the rest of the solution. This effectively increases the energy density of SynthOil. Additionally, control over the quantity of liquid SynthOil can be exercised to adjust the rate of crystal dissolution and consequent energy discharge.
Logged

Blood_Librarian

  • Bay Watcher
  • What is happening?
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #196 on: February 19, 2018, 01:16:36 pm »

Gel-matrix Bio-Paste

Our Synthetic Oil is used in a planely crude and broken matter when turned into electricity directly. By rebuilding the entire capacative system and building a concrete set of structual, electrical and mechanical guidelines in the creation of electricity from Synth-Oil, an entire system of electrical production is made; Gel-Matrix Bio-Paste. The carbon chains of the reactives are hit with a type of gamma radiation along with several recently discovered electromagnetic processes, resulting in a burst of inert iron compounds, electrons, and protons. The electrons are immediately disassociated from their atoms into (a large amount of) electricity. overall the reaction has a minor byproduct of heat and exotic particles from the reaction, and under no circumstance should individuals be exposed to an unshielded matrix in operation, but after twenty minutes, the matrix is safe for short-term maintenance provided that no individual has came under long-term exposure. special care must be taken to shield the gel-matrix from personnel, as it is an active radiological hazard when in operation.

Although technically a fusion reaction, it is of a totally different class of fusion then the fission and fusion committed by theoretical "classics" due to the fact that almost all of the energy created goes into sustaining the reaction, and very little of the actual energy itself is released as electrons. However, this still achieves higher energy densities then traditional combustion engines and our previous iteration of synth-oil consumption. It takes some time for the reaction in the synth-oil system to start, as the initial energy required to start it is low in the interests of having as much safety as possible in relation to the fissive materials required to start the reaction.

In deployment, Matrixes look like spheroid blobs of gunmetal navy-blue metal, slapped with radiological hazard signs that hum quietly when in operation when they are fed by tanks of synth-oil. If this metal was removed, one would see a web of piping that connect to various chambers, fuel lines and other systems connected to a tiny sample of nuclear material.  In the center of this array are two "combustion" chambers which attach to a transformer, ready to distribute electricity to the systems  that require it.  In the servicing of this device, the iron that has been pooled to specially made receptacles from the reaction must be removed, as it acts as a radiation soak, and then disposed of properly.

Personal-variants of the matrix cells are perfectly safe to handle provided that the proper guidelines are followed. Matrix cells are projected to replace all forms of synth-oil in use in most battle-field applications.

Quote
Gel-Matrix Bio-Paste (1): Blood_Librarian,
Tesla Radiatior (1): Talion,
SynthOil Crystallization (1): Talion,
ARES Treatment Plan (1): Blood_Librarian,
Logged
if you want something wacky
Quote from: ChiefWaffles, MAR Discord
I continue to be puzzled by BL's attempts to make Aratam blatantly evil

The Ensorceler

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #197 on: February 19, 2018, 03:19:26 pm »

Quote
Gel-Matrix Bio-Paste (2): Blood_Librarian, The Ensorceler
Tesla Radiatior (1): Talion,
SynthOil Crystallization (1): Talion,
ARES Treatment Plan (1): Blood_Librarian,

I like the Gel-Matrix Bio-Paste as a SynthOil reactor, but where is the Gel, or the Bio-Paste?
Logged

Blood_Librarian

  • Bay Watcher
  • What is happening?
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #198 on: February 19, 2018, 07:56:59 pm »

the chambers and other systems look like bags of gelly and the system requires a lot of carbon-based compounds, also referred to as Bio-Paste.
Logged
if you want something wacky
Quote from: ChiefWaffles, MAR Discord
I continue to be puzzled by BL's attempts to make Aratam blatantly evil

Shadowclaw777

  • Bay Watcher
  • Resident Wisenheimer
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #199 on: February 20, 2018, 01:09:56 pm »

Quote
Gel-Matrix Bio-Paste (3): Blood_Librarian, The Ensorceler, SC
Tesla Radiatior (1): Talion,
SynthOil Crystallization (1): Talion,
ARES Treatment Plan (1): Blood_Librarian,
Logged

johiah

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #200 on: March 01, 2018, 04:52:50 pm »

You guys have room for one more player?
Logged
Quote from: AoshimaMichio
Oh no, you won't laser my death star.
On a fun note, all of the beds just starting disintegrating

Shadowclaw777

  • Bay Watcher
  • Resident Wisenheimer
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #201 on: March 01, 2018, 04:59:41 pm »

Sure
Logged

johiah

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #202 on: March 01, 2018, 05:39:57 pm »

Just finished reading the thread.
Quote
Gel-Matrix Bio-Paste (4): Blood_Librarian, The Ensorceler, SC, Johiah
Tesla Radiatior (1): Talion,
SynthOil Crystallization (1): Talion,
ARES Treatment Plan (1): Blood_Librarian,
Logged
Quote from: AoshimaMichio
Oh no, you won't laser my death star.
On a fun note, all of the beds just starting disintegrating

Rockeater

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #203 on: March 01, 2018, 06:55:47 pm »

ptw
Logged
Damnit people, this is why I said to keep the truce. Because now everyone's ganging up on the cats.
Also, don't forget to contact your local Eldritch Being(s), so that they can help with our mission to destroy the universe.

Chiefwaffles

  • Bay Watcher
  • I've been told that waffles are no longer funny.
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Design Phase)
« Reply #204 on: March 02, 2018, 06:26:51 pm »

Gel-matrix Bio-Paste

Our Synthetic Oil is used in a planely crude and broken matter when turned into electricity directly. By rebuilding the entire capacative system and building a concrete set of structual, electrical and mechanical guidelines in the creation of electricity from Synth-Oil, an entire system of electrical production is made; Gel-Matrix Bio-Paste. The carbon chains of the reactives are hit with a type of gamma radiation along with several recently discovered electromagnetic processes, resulting in a burst of inert iron compounds, electrons, and protons. The electrons are immediately disassociated from their atoms into (a large amount of) electricity. overall the reaction has a minor byproduct of heat and exotic particles from the reaction, and under no circumstance should individuals be exposed to an unshielded matrix in operation, but after twenty minutes, the matrix is safe for short-term maintenance provided that no individual has came under long-term exposure. special care must be taken to shield the gel-matrix from personnel, as it is an active radiological hazard when in operation.

Although technically a fusion reaction, it is of a totally different class of fusion then the fission and fusion committed by theoretical "classics" due to the fact that almost all of the energy created goes into sustaining the reaction, and very little of the actual energy itself is released as electrons. However, this still achieves higher energy densities then traditional combustion engines and our previous iteration of synth-oil consumption. It takes some time for the reaction in the synth-oil system to start, as the initial energy required to start it is low in the interests of having as much safety as possible in relation to the fissive materials required to start the reaction.

In deployment, Matrixes look like spheroid blobs of gunmetal navy-blue metal, slapped with radiological hazard signs that hum quietly when in operation when they are fed by tanks of synth-oil. If this metal was removed, one would see a web of piping that connect to various chambers, fuel lines and other systems connected to a tiny sample of nuclear material.  In the center of this array are two "combustion" chambers which attach to a transformer, ready to distribute electricity to the systems  that require it.  In the servicing of this device, the iron that has been pooled to specially made receptacles from the reaction must be removed, as it acts as a radiation soak, and then disposed of properly.

Personal-variants of the matrix cells are perfectly safe to handle provided that the proper guidelines are followed. Matrix cells are projected to replace all forms of synth-oil in use in most battle-field applications.
Design: Gel-Matrix Bio-Paste
Hard: (2+3)-1 = 4: Below Average

In light of recent events, the Aratamite government has deemed it necessary to issue the Bureau an additional CryoStat tank. Though they would really like everyone to stop giving themselves lethal radiation poisoning. That'd be really nice, they say.

The Gel-Matrix is a large "nuclear-ish" reactor. It's expensive, it's dangerous, but it works damn well. We've lost numerous lower-ranking engineers in various containment failures, and a few times some leading engineers almost died before making it into the nearest CryoStat. When fed with SynthOil, it produces remarkable amounts of energy. Nothing extremely groundbreaking, but we dare-say that the current prototypes are the most efficient and productive reactors for their size and expense. By directly breaking down SynthOil with radiation instead of the previous crude process, we lose much less energy to waste processes.

Now, the problem is obvious. It's, again, really big. Too big to easily fit in any of our vehicles, and most certainly far too large to even consider using for anything infantry-related at the current moment. It's not huge - it has a rough radius of 1m. Fitting it into practically any design that's not the size of a small naval vessel or building would be immensely impractical, if not impossible. It's also fairly dangerous and unfit for being used near anything that we expect non-expendable people to spend any amount of time in; the radiation containment does most of the work but enough radiation leaks into the surroundings that harm to nearby biological life over time is very likely.
But these flaws are all the price to pay for something that produces the sheer amount of energy that the Gel-Matrix creates. Our engineers choose to prioritize effectiveness with this design.

Some of the engineers tell us that the radiation problem isn't necessarily a death sentence in terms of immediate practical use. Either don't put humans next to the reactor, just use particularly expendable humans, or do something else. The size, however, probably won't be an easy "fix" and we can't really find anyone particularly optimistic about substantial further miniaturization of a "nuclear-ish" reactor. A reactor certainly isn't cheap, but its expense isn't significant enough to notice a consistent increase in resource cost in designs that use it.
The Matrix is unfortunately not capable of being automatically retrofitted in any designs.


The Necrostate is tentatively installing a few Gel-Matrices well underneath important complexes and already extremely appreciative of the benefits, even if maintenance technicians have "a bit" of radiation poisoning. Though they're waiting for it to be a bit more safer to fully roll it out throughout Aratam.


Spoiler: Designs (click to show/hide)

The Revision Phase of Winter 1961 has begun.
Logged
Quote from: RAM
You should really look to the wilderness for your stealth ideas, it has been doing it much longer than you have after all. Take squids for example, that ink trick works pretty well, and in water too! So you just sneak into the dam upsteam, dump several megatons of distressed squid into it, then break the dam. Boom, you suddenly have enough water-proof stealth for a whole city!

Shadowclaw777

  • Bay Watcher
  • Resident Wisenheimer
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Revision Phase)
« Reply #205 on: March 02, 2018, 07:24:57 pm »

Quote from: Revision
LightningAxe”- Halberd Battletank Revision:
The revision actually a little more than what comes to the eye than just “upsizing” a Tesla Rifle into a Cannon, adding another SynthOil battery reactor to the Halberd Battletank, and calling it a day. First the Tesla Rifle that is upsized onto a weird cannon-looking piece as it’s derivative with an even larger lightning rod than the personnel variant, mainly because its a vehicle and they can hold larger and more powerful things than a human and its hand can. The Tesla Cannon, as the engineers refer to it, isn’t expecting to create a more powerful blast of electricity, rather because it’s a more powerful gun and has a SynthOil battery reactor compared to a soldier’s backpack, it can shoot out a Level 3 electricity blast only approximately thirty seconds to launch it down range, instead of the whole sixty seconds of the personnel equivalent. This is because more of the lightning is discharged in the larger metal rod faster and more efficiently, mainly because of the increased size and more electricity it can store.

Now where does this Tesla Cannon and it’s respective SynthOil battery reactor fit you might say, well instead of it replacing the coaxial Osprey (that still has uses of defeating non-bear armored infantry) it is instead of the secondary anti-bear armor weapons role, and is given its own port on the tank cannon and the reactor, of a smaller than a normal vehicle battery yet larger than a backpack size, fits comfortable between the 120mm electromagnetic cannon’s battery and the anti-personnel equipped Tesla Cannon’s battery. Operators that also field the loading of the 120mm cannon, shall also be the ones that “click” the Tesla’s trigger and activate the Tesla cannon

This instead of replacing the main line of Halberd Battletank, shall be a derivative of it, and have its own role as a more well-suited Assault tank, that can horrible electrify bear soldiers on the field.

Quote from: Votes
Lightning Axe: (1) SC
Logged

johiah

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Revision Phase)
« Reply #206 on: March 02, 2018, 08:17:08 pm »

Why don't we use this revision to improve the radiation shielding on the reactor, and maybe next turn make a boat with a magnetic cannon powered by one? Would make effective AA, the US navy is/was designing a magnetic cannon irl for use on boats as antimissile and anti plane.
Logged
Quote from: AoshimaMichio
Oh no, you won't laser my death star.
On a fun note, all of the beds just starting disintegrating

Shadowclaw777

  • Bay Watcher
  • Resident Wisenheimer
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Revision Phase)
« Reply #207 on: March 02, 2018, 08:19:14 pm »

https://discord.gg/nkz5XW9 Join that discord and we’ll have a better discussion about what we should get
Logged

Blood_Librarian

  • Bay Watcher
  • What is happening?
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Revision Phase)
« Reply #208 on: March 02, 2018, 10:47:08 pm »

Superconducting Magnetic Energy Storage (SMES) Battery

Our Synth-Oil "Batteries" are really just generators that run off of gasoline. When specially created Synth Oil Compounds immerses a set of alloyed copper coils along with several synth oil deprived compounds, the battery can be charged and discharged with a massive amount of electricity. A SMES battery can be neatly attached either directly to a  Gel-Matrix Reactor or off the main grid to charge it's own power up. These Batteries can range from the size of a coffee mug all the way up to the size of a car. Uniquely, a SMES Battery requires a Gel-matrix to fully charge due to the neutron immersion it requires for the coils to safely charge up, although it can be hooked up to a normal power source for around 80% of the capacity it would otherwise have. Due to the intensive experience in the relation of maintaining, creating and running the Matrix's, so that several systems can be hooked up to the Matrix itself to quickly and efficiently extinguish the reaction (The Radioactive material and some of the hot reactor components are dropped into lead box with cryogenically cooled chemical liquids  where they are rendered safe until the reactor is switched on, and the automated systems pick the dropped pieces up and slide them back to their designated places.)

The batteries themselves are expected to replace all current Synth-Oil systems in the field, and electricity will be used in the form of Synth-Oil to power our machines.

Quote from: botes
Lightning Axe: (1): SC
SMES Battery: (1): Blood_Librarian
« Last Edit: March 03, 2018, 11:19:42 pm by Blood_Librarian »
Logged
if you want something wacky
Quote from: ChiefWaffles, MAR Discord
I continue to be puzzled by BL's attempts to make Aratam blatantly evil

Talion

  • Bay Watcher
    • View Profile
Re: Mad Arms Race - Aratam Design Bureau (Winter 1961 - Revision Phase)
« Reply #209 on: March 03, 2018, 06:53:12 am »

Tesla Rifle Production Automation
Using sensors derived from the Hellfire missile and our own Storm missile, we have been able to better monitor the Lightning Rod creation process. This improvement has enabled us to spot flawed chambers before they are charged, allowing us to either fix the flaws or simply melt down the Rod and start over again. This lowers the complexity of the Rifle, enabling us to contemplate mass production.

Quote from: botes
Lightning Axe: (1): SC
SMES Battery: (1): Blood_Librarian
Tesla Rifle Production Automation: (1): Talion
Logged
Pages: 1 ... 12 13 [14] 15 16 ... 51