Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

Icons, like ASCII but prettier.

Hand-drawn, like an old-timey sepia map.

Full graphics, like JRPGs with full-on sprites.

Same as the tileset ingame. Forests would use the tree sprite, mountains a rock sprite, etc.

Other. Please post your ideas/examples.

[Schmaven]

It does look like something in your save folder for sure.  I don't know what it might be though.  At least you've narrowed down the effect to certain world tile types.  I would am planning to just struggle to read the world map for the next few embarks or so until you want to I tire of this world and generate a new world from a fresh install.  The <c> screen is messed up just as the world map is, but otherwise in game appears fine as far as I can tell.

Edit: You might be able to take the seed values of your region1 world and recreate it if you're only 1 embark in, and had big long term plans for the world.

Edit 2: This is very strange, but I just checked and my world map with the Meph+Vordak (lite) tileset is messed up in the exact same way as yours is now.  I did not see that coming lol.

Spoiler: World Map (click to show/hide)

I can at least confirm in my case that I do nothing fancy with the game.  I use just what's including in the LNP and nothing else.  And within the LNP, I only use Dwarf Therapist and DFHack.  DFHack just for the savestock / loadstock function, plus whatever it does in the background.  The only thing that changed with my computer was I re-downloaded a game from the steam client.  Perplexing indeed.

[Arson]

It does look like something in your save folder for sure.  I don't know what it might be though.  At least you've narrowed down the effect to certain world tile types.  I would just struggle to read the world map for the next few embarks or so until you want to generate a new world (as long as the in game tiles are still good of course), then make one with a fresh install where it's all good.

Edit: You might be able to take the seed values of your region1 world and recreate it if you're only 1 embark in, and had big long term plans for the world.

Edit 2: This is very strange, but I just checked and my world map with the Meph+Vordak (lite) tileset is messed up in the exact same way as yours is now.  I did not see that coming lol.

Spoiler: World Map (click to show/hide)

I can at least confirm in my case that I do nothing fancy with the game.  I use just what's including in the LNP and nothing else.  And within the LNP, I only use Dwarf Therapist and DFHack.  DFHack just for the savestock / loadstock function, plus whatever it does in the background.  The only thing that changed with my computer was I re-downloaded a game from the steam client.  Perplexing indeed.

Thank you for your input. That at least helps to eliminate the possibility of something really strange going on with my computer and seems to suggest something with the tileset itself.

I also use the LNP and DFhack, but otherwise nothing "fancy". I haven't added any tilesets or utilities that aren't included in the LNP. I've just played with some settings that are already included and haven't had any issues other than this.

For the time being I can just push through this because it's just the map and you don't look at it very often. I just irks me when I put it into Legends Viewer, for example, and all this gray stuff is everywhere.

[Schmaven]

If you go to the <h> holdings view of the civilization screen, that part is normal, so raiding and missions from there are fine.

[GandalfTheGreyt3791]

I ended up installing through the lazynewbpack and I was wondering how I would change the graphics from the vordack folder to the meph one?

[Schmaven]

In the past I've been able to just double click on the graphics packs right in the LNP launcher to change them around.

[GandalfTheGreyt3791]

I tried but nothing happened

[Novaris]

Unfortunately there is little I can offer to help. I am familiar with Meph's launcher and how its supposed to work but I have no idea how this was included in the LNP. Mephs tileset is much more complicated and even the order of appearance in the overrides files makes a difference (see bookcase vs. zone tile in libraries). If LNP screws the copying of all these inits up then it might look weird in the end. Also, usually the tiles used in the world map dont come from Mephs additional tiles but from the "font" tileset, maybe this is messed up? Could you provide a screenshot of your "arts" folder with the thumbnails on and your init.txt and d_init.txt so I can see which tiles are used?

[Arson]

Thanks, I appreciate the help. Would that be the .txt files you're asking for from Dwarf Fortress 0.47.04\data\init   **or**     from LNP\graphics\Meph\data\init? Same for the art folder. There's one with DF and one with each tileset in the LNP folders (I'm sure you just need Meph). I can provide any or all or whatever.

[Novaris]

the ones in Dwarf Fortress 0.47.04\data\init, these are the ones used by the game and altered when LNP launcher changes the tileset.

[Arson]

Here you are.

art

Spoiler (click to show/hide)

-Dwarf Fortress 0.47.04\data\init  -- init.txt

Spoiler (click to show/hide)

WARNING: Do NOT copy over the init.txt from an earlier version of DF.
Always read the file carefully, including the comments.

In general, you can copy savegames and tilesets from older DF
versions, but you should not copy anything else.  You should not, under any
circumstances, unpack a new DF on top of an older one.


Change this to turn sound off.

[SOUND:NO]

The sound volume runs from 0 (off) to 255 (full).  You can set the volume from the ESC options menu as well.

[VOLUME:255]

Change this to skip the wonderful intro movies.

[INTRO:NO]

This lets you set the starting windowed/fullscreen setting.  Can be YES, NO or PROMPT.

[WINDOWED:YES]

This is the size and font for windowed mode.  Changing to the 800x600 font might make you happier.
If set below 256x256 it specifies the grid size instead, with a minimum of 80x25.

[WINDOWEDX:80]
[WINDOWEDY:25]
[FONT:curses_640x300.png]

You may disable window resizing if you wish.
[RESIZABLE:YES]

Full screen info.  The 0s below mean that the game will choose a resolution for you, but you can set it yourself as well.

[FULLSCREENX:0]
[FULLSCREENY:0]
[FULLFONT:curses_640x300.png]

If this is set to NO, tiles will be stretched to fit the screen if there is a resolution mismatch.
If this is set to YES, the tiles will not be stretched, but rather the game view will be centralized, surrounded by black space.  Tiles that are too large will always be compressed rather than running off the screen.

[BLACK_SPACE:YES]

Graphics info, most of it as above.  Set GRAPHICS to YES to turn it all on.  This will use the "raw/graphics" folder for tile information.  Currently this is limited to whatever creature graphics you have downloaded.  The game comes with a few pictures to demonstrate.  As of February 2020, the Dwarf Fortress Wiki has custom tilesets available at http://dwarffortresswiki.org/index.php/Tileset_repository and creature graphics at http://dwarffortresswiki.org/index.php/Graphics_set_repository.

[GRAPHICS:YES]
[GRAPHICS_WINDOWEDX:0]
[GRAPHICS_WINDOWEDY:0]
[GRAPHICS_FONT:Meph_32x32.png]
[GRAPHICS_FULLSCREENX:0]
[GRAPHICS_FULLSCREENY:0]
[GRAPHICS_FULLFONT:Meph_32x32.png]
[GRAPHICS_BLACK_SPACE:YES]

These settings can have a significant impact on frame rate, especially for people that have slow frame rates on the title screen.  Available modes are 2D, 2DSW, 2DASYNC, STANDARD, PARTIAL:<number>, ACCUM_BUFFER, FRAME_BUFFER and VBO. The number after PARTIAL refers to how many frames it will redo a printed tile before skipping it, so you might try increasing it a bit if you have flickering when PARTIAL is set.  Please note that any of these combinations might cause frame rates to drop significantly or cause unpleasant side effects like flickering.

By and large, 2D should be the most reliable, while STANDARD has a good combination of speed and reliability. However, all 2D modes are normally far slower than even STANDARD, which may be the slowest OpenGL mode.

On a multi-core machine none of this is very likely to matter; stick to 2D.

2DASYNC may be slightly more responsive than 2D on a multi-core machine, but this has recently become doubtful due to improvements to the other modes.

Linux/OS X users may also use PRINT_MODE:TEXT for primitive ncurses output.

[PRINT_MODE:TWBT]
   Mode examples:
    PRINT_MODE:2D
    PRINT_MODE:TEXT
    PRINT_MODE:FRAME_BUFFER
    PRINT_MODE:PARTIAL:0
[SINGLE_BUFFER:NO]

Switches truetype on whenever the vertical tile size is this many pixels or larger.  You may also use YES/NO to force it on/off.  Turning it off may provide a minor speed boost (using font small enough that it doesn't activate won't).

[TRUETYPE:NO]

Change this to YES to keep the DF window on top of your other windows.

[TOPMOST:NO]

Change this to YES if you want to see an FPS counter at the top left.

[FPS:YES]

Use this to set the maximum frame rate during play.  The movies are always capped at 100.  A frame in this case is not graphical but related to the movement speed of a creature.  A healthy, unencumbered dwarven peasant takes one step every 10 frames.

You may set FPS_CAP to 0 to make it uncapped.

[FPS_CAP:75]

Use this to set the maximum graphical frame refresh rate during play.

[G_FPS_CAP:45]

On cards that support the OpenGL ARB_sync extension, turning this on can improve framerates in GPU overload conditions. It defaults to NO, as many cards that claim to support this will crash if asked to do so.

[ARB_SYNC:NO]

This sets the applications vertical synchronization behavior.  Changing this to YES can impact your FPS if your G_FPS is high. ARB_SYNC is a better option, if your system supports it.

[VSYNC:NO]

Change this to NEAREST if you want the texture values to use the nearest pixel without averaging.
Change this to LINEAR if you want the texture values to be averaged over the adjacent pixels.

[TEXTURE_PARAM:LINEAR]

Change this to make the dwarfort.exe process have a different priority.  From highest to lowest, the options are REALTIME, HIGH, ABOVE_NORMAL, NORMAL, BELOW_NORMAL and IDLE.

[PRIORITY:NORMAL]

Use this to set how fast the game zooms.  The default corresponds to
increasing grid size by 10 units each time you zoom.

[ZOOM_SPEED:10]

Change this to NO if you don't want to have the mouse involved at all.

[MOUSE:YES]

Change this to YES if you'd like to use a BMP for the mouse cursor.  The image currently lags when the game is lagging however.

[MOUSE_PICTURE:NO]

This controls the number of milliseconds that must pass before a held key sends an initial repeat press to the game.  You might need to adjust this.

[KEY_HOLD_MS:250]

This controls the number of milliseconds that must pass before a held key sends a repeat press to the game after the repeat process has begun.

[KEY_REPEAT_MS:150]

If you set KEY_REPEAT_ACCEL_LIMIT above one, then after KEY_REPEAT_ACCEL_START repetitions the repetition delay will smoothly decrease until repetition is this number of times faster than at the start.

[KEY_REPEAT_ACCEL_LIMIT:8]
[KEY_REPEAT_ACCEL_START:10]

This controls the number of milliseconds between macro instructions.

[MACRO_MS:0]

This controls the number of milliseconds that must pass before input works again after the view recenters on an event in dwarf mode.

[RECENTER_INTERFACE_SHUTDOWN_MS:0]

Change this to NO if you want to leave save uncompressed (you might want to do this if you are experience save corruption).

[COMPRESSED_SAVES:YES]

Dwarf Fortress 0.47.04\data\init  --  d_init.txt

Spoiler (click to show/hide)

WARNING: Do NOT copy over the d_init.txt from an earlier version of DF.
Always read the file carefully, including the comments.

In general, you can copy savegames and tilesets from older DF
versions, but you should not copy anything else.  You should not, under any
circumstances, unpack a new DF on top of an older one.


Use these to control the automatic saving behavior in the dwarf fortress mode of game.  AUTOSAVE can be set to NONE, SEASONAL or YEARLY.  This updates your save at these intervals, so that some of your progress will be saved in case of system instability.  You can set AUTOBACKUP to YES if you want the updated save to be copied to another folder so that you'll have several copies of your world at different times.  Set AUTOSAVE_PAUSE to YES if you want the game to pause every time it autosaves.

[AUTOSAVE:SEASONAL]
[AUTOBACKUP:NO]
[AUTOSAVE_PAUSE:NO]

Set this to YES if you want it to save the game when you start a new fortress.  If AUTOBACKUP above is set to YES, it will also create a copy of this new save.

[INITIAL_SAVE:YES]

Set this to NO to make Dwarf Fortress remain in the saved pause state when you load an active game.

[PAUSE_ON_LOAD:YES]

Set this to YES if you want Dwarf Fortress to show the warning window for embark site selection even if there are no issues (as a way of confirming your choice).

[EMBARK_WARNING_ALWAYS:NO]

This option controls whether or not your choice to embark has a confirmation window after you have selected any dwarves and equipment.  Valid choices are ALWAYS, IF_POINTS_REMAIN and NO.

[POST_PREPARE_EMBARK_CONFIRMATION:IF_POINTS_REMAIN]

You can change the option below to ALWAYS and NO.  More restrictive world parameter settings override these.  ALWAYS lets you see the features in the Local view during embark, and NO stops you from looking for features in the site finder (though if you really want to stop the finder, it might be better for you to generate worlds that restrict the use of this feature completely, in which case you don't need to change the settings here).

[SHOW_EMBARK_TUNNEL:FINDER]

Use these options to remove features from the game.  Permitted values are YES and NO.  Removal might speed the game up in the case of temperature and weather.

[TEMPERATURE:YES]
[WEATHER:YES]
[ECONOMY:YES]
[INVADERS:YES]
[CAVEINS:YES]
[ARTIFACTS:YES]
[ZERO_RENT:NO]
[TESTING_ARENA:YES]
[WALKING_SPREADS_SPATTER_DWF:NO]
[WALKING_SPREADS_SPATTER_ADV:YES]

Change this to YES to output the reasons for world map rejection into a file.

[LOG_MAP_REJECTS:NO]

Change these numbers to make the embark rectangle start at a different size.  The format is (EMBARK_RECTANGLE:<width>:<height>).  Numbers may run from 2 to 16.  The map size warning message will go by these numbers.

[EMBARK_RECTANGLE:4:4]

Change these numbers to set the default weights for traffic designations.  If you make the last numbers too large, pathfinding might lag.
The format is (PATH_COST:<high>:<normal>:<low>:<restricted>).

[PATH_COST:1:2:5:25]

Alter these options to control how aggressively your dwarves place objects in a container with like items (rather than an empty container).  The default options are very aggressive.  STORE_DIST_ITEM_DECREASE controls the cap on objects it will consider -- for each object it finds in a container, one tile is removed from its apparent distance to the dwarf, up to this cap.  The others control how many tiles are removed for each combination type for any match at all.  For instance, if ITEM_DECREASE is set to 20, and SEED_COMBINE is set to 100, a dwarf carrying seeds will see a seed bag with 15 seeds as 115 tiles closer than it actually is (and thus pass up any empties within that distance), whereas a seed bag with 30 seeds would be treated as 120 tiles closer (because it hits the ITEM_DECREASE cap).  Values from 2 to 1000 are permitted.  Before these init options, the behavior was roughly ITEM_DECREASE 2, SEED_COMBINE 2 and the rest at 1000.

[STORE_DIST_ITEM_DECREASE:20]
[STORE_DIST_SEED_COMBINE:1000]
[STORE_DIST_BUCKET_COMBINE:1000]
[STORE_DIST_BARREL_COMBINE:1000]
[STORE_DIST_BIN_COMBINE:1000]

Change this to YES to disallow pets from coffin burial as the default option.

[COFFIN_NO_PETS_DEFAULT:NO]

Use these to set the color of wounded body parts.  The format is <foreground color>:<background color>:<brightness>.

[WOUND_COLOR_NONE:7:0:1]  No recorded active wounds on the part.  Default = white
[WOUND_COLOR_MINOR:6:0:0]  Any damage that doesn't have functional/structural consequences (might be heavy bleeding though).  Default = brown
[WOUND_COLOR_INHIBITED:6:0:1]  Any muscular, structural or functional damage without total loss.  Default = yellow
[WOUND_COLOR_FUNCTION_LOSS:3:0:1]  An important function of the part is completely lost, but the part is structurally sound (or at least partially intact).  Default = bright cyan
[WOUND_COLOR_BROKEN:4:0:1]  The part has lost all structural integrity or muscular ability.  Default = bright red
[WOUND_COLOR_MISSING:0:0:1]  The part is completely gone.  Default = dark gray

This controls the display of areas that are far below outside.  The format is SKY:<character>:<foreground color>:<background color>:<brightness>.  The <character> can be either an ASCII tile number or a character in quotes, like '#'.

[SKY:32:8:9:0]

As above, for inside/subterranean areas.

[CHASM:0:0:0:1]

Pillar tile, <character> as above.

[PILLAR_TILE:199]

Track tiles.  I at the end inverts the material colors.

[TRACK_N:208]
[TRACK_S:210]
[TRACK_E:198]
[TRACK_W:181]
[TRACK_NS:179]
[TRACK_NE:192]
[TRACK_NW:217]
[TRACK_SE:218]
[TRACK_SW:191]
[TRACK_EW:196]
[TRACK_NSE:195]
[TRACK_NSW:180]
[TRACK_NEW:193]
[TRACK_SEW:194]
[TRACK_NSEW:158]
[TRACK_RAMP_N:30]
[TRACK_RAMP_S:30]
[TRACK_RAMP_E:30]
[TRACK_RAMP_W:30]
[TRACK_RAMP_NS:30]
[TRACK_RAMP_NE:30]
[TRACK_RAMP_NW:30]
[TRACK_RAMP_SE:30]
[TRACK_RAMP_SW:30]
[TRACK_RAMP_EW:30]
[TRACK_RAMP_NSE:30]
[TRACK_RAMP_NSW:30]
[TRACK_RAMP_NEW:30]
[TRACK_RAMP_SEW:30]
[TRACK_RAMP_NSEW:30]

Tiles for the parts of trees.

[TREE_ROOT_SLOPING:118] * 127
[TREE_TRUNK_SLOPING:127] * 127
[TREE_ROOT_SLOPING_DEAD:118] * 127
[TREE_TRUNK_SLOPING_DEAD:127] * 127
[TREE_ROOTS:118]
[TREE_ROOTS_DEAD:118]
[TREE_BRANCHES:5]
[TREE_BRANCHES_DEAD:5]
[TREE_SMOOTH_BRANCHES:5]
[TREE_SMOOTH_BRANCHES_DEAD:5]
[TREE_TRUNK_PILLAR:10]
[TREE_TRUNK_PILLAR_DEAD:10]
[TREE_CAP_PILLAR:10]
[TREE_CAP_PILLAR_DEAD:10]
[TREE_TRUNK_N:205]
[TREE_TRUNK_S:205]
[TREE_TRUNK_N_DEAD:205]
[TREE_TRUNK_S_DEAD:205]
[TREE_TRUNK_EW:205]
[TREE_TRUNK_EW_DEAD:205]
[TREE_CAP_WALL_N:205]
[TREE_CAP_WALL_S:205]
[TREE_CAP_WALL_N_DEAD:205]
[TREE_CAP_WALL_S_DEAD:205]
[TREE_TRUNK_E:186]
[TREE_TRUNK_W:186]
[TREE_TRUNK_E_DEAD:186]
[TREE_TRUNK_W_DEAD:186]
[TREE_TRUNK_NS:186]
[TREE_TRUNK_NS_DEAD:186]
[TREE_CAP_WALL_E:186]
[TREE_CAP_WALL_W:186]
[TREE_CAP_WALL_E_DEAD:186]
[TREE_CAP_WALL_W_DEAD:186]
[TREE_TRUNK_NW:201]
[TREE_CAP_WALL_NW:201]
[TREE_TRUNK_NW_DEAD:201]
[TREE_CAP_WALL_NW_DEAD:201]
[TREE_TRUNK_NE:187]
[TREE_CAP_WALL_NE:187]
[TREE_TRUNK_NE_DEAD:187]
[TREE_CAP_WALL_NE_DEAD:187]
[TREE_TRUNK_SW:200]
[TREE_CAP_WALL_SW:200]
[TREE_TRUNK_SW_DEAD:200]
[TREE_CAP_WALL_SW_DEAD:200]
[TREE_TRUNK_SE:188]
[TREE_CAP_WALL_SE:188]
[TREE_TRUNK_SE_DEAD:188]
[TREE_CAP_WALL_SE_DEAD:188]
[TREE_TRUNK_NSE:204]
[TREE_TRUNK_NSE_DEAD:204]
[TREE_TRUNK_NSW:185]
[TREE_TRUNK_NSW_DEAD:185]
[TREE_TRUNK_NEW:202]
[TREE_TRUNK_NEW_DEAD:202]
[TREE_TRUNK_SEW:203]
[TREE_TRUNK_SEW_DEAD:203]
[TREE_TRUNK_NSEW:206]
[TREE_TRUNK_NSEW_DEAD:206]
[TREE_TRUNK_BRANCH_N:202] * 207
[TREE_TRUNK_BRANCH_N_DEAD:202] * 207
[TREE_TRUNK_BRANCH_S:203] * 209
[TREE_TRUNK_BRANCH_S_DEAD:203] * 209
[TREE_TRUNK_BRANCH_E:204] * 199
[TREE_TRUNK_BRANCH_E_DEAD:204] * 199
[TREE_TRUNK_BRANCH_W:185] * 182
[TREE_TRUNK_BRANCH_W_DEAD:185] * 182
[TREE_BRANCH_NS:179]
[TREE_BRANCH_NS_DEAD:179]
[TREE_BRANCH_EW:196]
[TREE_BRANCH_EW_DEAD:196]
[TREE_BRANCH_NW:217]
[TREE_BRANCH_NW_DEAD:217]
[TREE_BRANCH_NE:192]
[TREE_BRANCH_NE_DEAD:192]
[TREE_BRANCH_SW:191]
[TREE_BRANCH_SW_DEAD:191]
[TREE_BRANCH_SE:218]
[TREE_BRANCH_SE_DEAD:218]
[TREE_BRANCH_NSE:195]
[TREE_BRANCH_NSE_DEAD:195]
[TREE_BRANCH_NSW:180]
[TREE_BRANCH_NSW_DEAD:180]
[TREE_BRANCH_NEW:193]
[TREE_BRANCH_NEW_DEAD:193]
[TREE_BRANCH_SEW:194]
[TREE_BRANCH_SEW_DEAD:194]
[TREE_BRANCH_NSEW:158]
[TREE_BRANCH_NSEW_DEAD:158]
[TREE_TWIGS:5]
[TREE_TWIGS_DEAD:5]
[TREE_CAP_RAMP:112]
[TREE_CAP_RAMP_DEAD:112]
[TREE_CAP_FLOOR1:112] * 249
[TREE_CAP_FLOOR2:112] * 249
[TREE_CAP_FLOOR1_DEAD:112] * 249
[TREE_CAP_FLOOR2_DEAD:112] * 249
[TREE_CAP_FLOOR3:112] * 249
[TREE_CAP_FLOOR4:112] * 249
[TREE_CAP_FLOOR3_DEAD:112] * 249
[TREE_CAP_FLOOR4_DEAD:112] * 249
[TREE_TRUNK_INTERIOR:126]
[TREE_TRUNK_INTERIOR_DEAD:126]

This controls the "IDLERS: <number>" that is displayed in dwarf mode.  You can set it to TOP, BOTTOM or OFF.

[IDLERS:TOP]

You can have your dwarves start/arrive without any labor types enabled here by setting this to NO.  You can also set it to SKILLS to make the labor list set by skill, or BY_UNIT_TYPE to have it done by overall unit type.

[SET_LABOR_LISTS:SKILLS]

You can set the maximum population of your fortress here.  Keep in mind that your population must be at least 80 to get a king and 100 to obtain the current game features.  The strict cap also stops fort births.  Both caps can be violated by a few special cases, like the arrival of the monarch if you qualify.

[POPULATION_CAP:125]
[STRICT_POPULATION_CAP:160]

This allows you to control the number of babies+children in your fortress.  The first number is an absolute cap on the number of babies+children.  The second is a percentage of the current number of adults in your fortress (the default is the essentially meaningless 1000% here).  The lower number is used as the cap.  The cap only prevents further pregnancies, so migrant children, multiple births and existing pregnancies from old saves can still push you over the cap.  Setting either number to zero will disallow pregnancies in the fortress.

[BABY_CHILD_CAP:100:1000]

You can set the maximum number of visitors to your fort here.  This does not include merchants, diplomats, animals or invaders, but only those either dropping by for a temporary visit to a tavern, library or temple, or those seeking permanent employment.  Once you accept a petition from a visitor to stay at your fort, they no longer count against the cap, even if they never become a full citizen.  Certain traveling groups (e.g. quester parties) may also push slightly over the cap.

[VISITOR_CAP:50]

You can set the maximum number of soldiers allowed to invade in serious invasions with these numbers.  This doesn't affect smaller raids or mounts, and ambushers and other special units will also ignore the cap.  Set INVADERS to NO above if you don't want invaders -- a cap of zero will be ignored here.

[INVASION_SOLDIER_CAP:120]
[INVASION_MONSTER_CAP:40]

Use the specific seed cap to set the maximum number of seeds of each kind generally allowed in the fortress.  Use the fortress seed cap to control the overall number of seeds allowed.  Seeds over the global cap will be periodically removed, starting with the oldest and most worthless seeds.

[SPECIFIC_SEED_CAP:200]
[FORTRESS_SEED_CAP:3000]

If you don't like the ,.`' ground, try setting this to NO.  The ground will turn into periods only.

[VARIED_GROUND_TILES:YES]

If you'd like your engravings to start off looking the same (you can toggle them on individual later), set this to YES.

[ENGRAVINGS_START_OBSCURED:YES]

If you get annoyed by seeing items like *<*sword*>* you can
get rid of the outside ** by setting this to NO.

[SHOW_IMP_QUALITY:YES]

Set this to YES to display fluids as numbers indicating depth.

[SHOW_FLOW_AMOUNTS:YES]

If you'd prefer to leave the history behind every engraving for your adventurers to discover, then set this to NO.

[SHOW_ALL_HISTORY_IN_DWARF_MODE:YES]

This controls "more" in adventure mode.  If MORE is set to NO, all announcements will be skipped.  DISPLAY_LENGTH controls how many lines are printed before it gives you the "more" prompt.

[MORE:YES]
[DISPLAY_LENGTH:23]

Set this to NO if you do not want traps to affect you in adventure mode.  Cage traps are always disabled for now.

[ADVENTURER_TRAPS:YES]

Set this to NO if you want the game to recenter on your adventurer only when you've gotten close to the edge of the view.

[ADVENTURER_ALWAYS_CENTER:YES]

This controls the up/down views in adventure mode.  The first parameter can be OFF, UNHIDDEN, CREATURE or ON.  UNHIDDEN makes the view appear when it contains any unhidden square.  CREATURE makes the view appear when it contains a creature.  The second parameter is the size of the view.  It can be 3, 5, 7 or 9.  A smaller view lets it stack more of them in the column (3 at size 5, and 5 at size 3).

[ADVENTURER_Z_VIEWS:UNHIDDEN:9]

You can use these to say how nicknames are displayed in each mode
Options are REPLACE_FIRST, CENTRALIZE (between first and last), REPLACE_ALL

[NICKNAME_DWARF:REPLACE_FIRST]
[NICKNAME_ADVENTURE:REPLACE_FIRST]
[NICKNAME_LEGENDS:REPLACE_FIRST]

Set this number to scale how often grazing animals need to eat.  Larger numbers mean less food is necessary.  Metabolism is always set according to the 3/4ths power of size.

[GRAZE_COEFFICIENT:100]

Set these to control how subgroups form and develop in the fortress.

[PRIESTHOOD_UNIT_COUNTS:10:25]
[TEMPLE_VALUE_LEVELS:2000:10000]
[GUILD_UNIT_COUNTS:10:25]
[GUILDHALL_VALUE_LEVELS:2000:10000]

[Novaris]

Seems to be the font setting to me, it uses curses instead of the Meph font for displaying text, part of displaying text is also the world map (it actually just uses letters to represent stuff, like the necro tower being the capital I). If you change the two lines in init.txt

[FONT:curses_640x300.png]

to

[FONT:font_Meph_clean_16x24.png]

the map should look much better. You can actually just pick any font you like. The default in the Meph pack is called "font.png" which seems to be "font_Meph_embossed_12x24-v4.png" in you art folder. You can also choose this one instead by altering the two lines to this filename. LNP should also allow changing the font.

[Arson]

LNP does allow for this. I'll make some changes and report back. Thank you.

[Arson]

Okie dokie, so I changed the [FONT:curses_640x300.png] over to [FONT:font_Meph_clean_16x24.png]. The LNP has an easy place to do this. Here's what I get.

Meph tileset:

Spoiler (click to show/hide)

It's a bit hard to compare to the original "problem child" map that I'll link again below because it seems the zoom levels are different.

Weird gray tile map problem thing:

Spoiler (click to show/hide)

So it would seem the culprit is an issue with the curses_640x300.png not playing nice with something. It's worth pointing out that if you install the Meph tileset using the LNP it will automatically set that curses font. I'm not sure why this is the choice. Perhaps a TWBT thing? Not sure, I'm still kinda new.

Perhaps this might be a thing I should bring up to PeridexisErrant on the LNP thread?

[Novaris]

Well at least we see the change to the font. I personally also use the smaller version "font_Meph_clean_12x24.png" as this does not blow up the screen so dramatically. There is yet another switch which is the color setting. There is a txt file in the init folder called colors.txt, this defines how "red" is represented on screen and the game actually mixes certain colors to generate new ones, this is also controlled by the LNP. If you want we can also compare the colors in Mephs set to your current color setting but then there is nothing more to set.

TWBT is not to blame here as this merely diverts tile usage using the override.txt file and for world maps its not used.

[Arson]

Sure, how would we go about comparing? What do you need?