Print

Please login or register.
1 Hour 1 Day 1 Week 1 Month Forever
Login with username, password and session length

[Wolfkit]

Move to a testing room,  Tank (2783988888) > Card (ZA9521)

I'm not finding any card with "ZA9521". Closest is ZA2431

Whoops. ZV9521

[Toaster]

Tank [276456] -> Long Metal Box -> Printer [LT1634]

   Cylinder [XKM&] --^   ^-- Hexagon

To confirm:  These were floppy flesh pancakes instead of floppy iron pancakes?

Try again, leaving the expended fuse out.

Iron, yeah. (Note to self, something other then straight number strings in the future)

And they should have been propelled across the room after being printed.

Interesting.

Try again as in the quote; the burnt out fuse is not replaced.

[Unholy_Pariah]

reprint it without the cylinder or hexagon.

[piecewise]

Move to a testing room,  Tank (2783988888) > Card (ZA9521)

I'm not finding any card with "ZA9521". Closest is ZA2431

Whoops. ZV9521

I'd love to do that but a small bull with iron horns has just ran into your testing chamber at unreasonably high speeds and is breathing a concentrated beam of red mist at you.

Tank [276456] -> Long Metal Box -> Printer [LT1634]

   Cylinder [XKM&] --^   ^-- Hexagon

To confirm:  These were floppy flesh pancakes instead of floppy iron pancakes?

Try again, leaving the expended fuse out.

Iron, yeah. (Note to self, something other then straight number strings in the future)

And they should have been propelled across the room after being printed.

Interesting.

Try again as in the quote; the burnt out fuse is not replaced.

A single iron pickax that is propelled across the room.

reprint it without the cylinder or hexagon.

Without the hex it produces the same thing, a superfast fleshy bull with iron horns that breaths red mist, but this bull just sort of mills around.

[Wolfkit]

"Nope."
Nopeclip out of the testing chanber and lock the door.

[Unholy_Pariah]

((Was the new bull supposed to be superfast? It had no modifiers active as far as im aware.))

turn the dial on the printer right 45°
Activate running skull hex.
Activate cylinder BZG@
Pull trigger.

Go pet docile bull, inspect his breath, is it rust or blood or an amalgamation of the two?

[piecewise]

((Was the new bull supposed to be superfast? It had no modifiers active as far as im aware.))

turn the dial on the printer right 45°
Activate running skull hex.
Activate cylinder BZG@
Pull trigger.

Go pet docile bull, inspect his breath, is it rust or blood or an amalgamation of the two?

(When you said "Hex or Fuse" I read that as "without one or the other" ie, use the hex or use the fuse. If you meant "use neither" then no, it wouldn't be fast)

Also, inspect how? Just look at it or something more?

[Unholy_Pariah]

((Was the new bull supposed to be superfast? It had no modifiers active as far as im aware.))

turn the dial on the printer right 45°
Activate running skull hex.
Activate cylinder BZG@
Pull trigger.

Go pet docile bull, inspect his breath, is it rust or blood or an amalgamation of the two?

(When you said "Hex or Fuse" I read that as "without one or the other" ie, use the hex or use the fuse. If you meant "use neither" then no, it wouldn't be fast)

Also, inspect how? Just look at it or something more?

tear off a piece of my shirt and hold it in front of its face i guess. Then wipe it on the floor and see if it smears like blood or just causes discoloration like rust.

[Toaster]

"Interesting!"

Inspect hexagon.  Is it marked?  Inspect pickaxe.  Does it still want to move or is it good now?

Tank [276456] -> Long Metal Box -> Printer [LT1634]

   Cylinder [XKM&] --^   ^-- Hexagon

To confirm:  These were floppy flesh pancakes instead of floppy iron pancakes?

Try again, leaving the expended fuse out.
[/quote]

Move back to the lab chamber.  Replace the hexagon with another (if you've posted a name list I haven't seen it) and try again.

[piecewise]

"Nope."
Nopeclip out of the testing chanber and lock the door.

[3]
You dodge...some of the mist, but a good bit of it still hits you. You get outside and slam the door to the testing chamber shut, locking it for good measure. The exposed skin where the mist hit begins to bleed through the pores.

((Was the new bull supposed to be superfast? It had no modifiers active as far as im aware.))

turn the dial on the printer right 45°
Activate running skull hex.
Activate cylinder BZG@
Pull trigger.

Go pet docile bull, inspect his breath, is it rust or blood or an amalgamation of the two?

I'm gonna assume you're using the same setup.

It produces another bull, somewhat larger, which goes running off again, though not as quickly.


You hold the rag in front of the creature's breath. With your hand, I suspect.

Rubbing it on the floor produces no real smear, rather just a powdery reddish spot.

Oh and your hand is bleeding from the pores now.

"Interesting!"

Inspect hexagon.  Is it marked?  Inspect pickaxe.  Does it still want to move or is it good now?

Tank [276456] -> Long Metal Box -> Printer [LT1634]

   Cylinder [XKM&] --^   ^-- Hexagon

To confirm:  These were floppy flesh pancakes instead of floppy iron pancakes?

Try again, leaving the expended fuse out.

Move back to the lab chamber.  Replace the hexagon with another (if you've posted a name list I haven't seen it) and try again.
[/quote]
The hex is "=>"

The pickax seems very docile now.

The new hex has a picture of a little flame running on cartoon legs.

And you want to use this where you are, alone in the medical room, right? Can you explain to me exactly how this is set up and where you're standing in relation to it? Is the printer sitting on the floor in front of you, are you holding it, pointed at or away from your face, etc.

[Unholy_Pariah]

Go to medical and bandage my hand, also kick toaster out so he doesnt break the place.

Hopefully my big bull isnt blocking the doorway murdering someone.


If i do manage to get to medical and get my hand bandaged then:

Grab some latex gloves and a surgery suit.
Head to supply and grab another set of bullmaking tanks and a few buckets.

[Toaster]

And you want to use this where you are, alone in the medical room, right? Can you explain to me exactly how this is set up and where you're standing in relation to it? Is the printer sitting on the floor in front of you, are you holding it, pointed at or away from your face, etc.

Nah, I had moved the assembly back to the main lab.  I'd be facing the control panel that lets me turn the thing on.  It'd be placed on a convenient flat surface (table, workbench, whatever is available.)

Also, oh dear.

[Hapah]

Retire from the Lab to a life of luxury.

((RL is taking too much time lately))

[piecewise]

Hey wolfkit, gonna need a response here. There's a new angry bull coming for you, after all

THANKS UNHOLY!

[Unholy_Pariah]

You are most welcome.