select predator, if asked for equipment choose a MKIII suit and my flamethrower loaded with clf3
It asks you to select a place for the mission to take place; Ie Urban, jungle, antarctic, etc
((Half a soda can is a little thicker than I would've liked. Presumably amps are fairly compact, so is that mostly battery or mostly explosives that gives the thickness? Well, it's more compact than a kiloton charge either way, I guess.
And yes, mounting things other than the pods is exactly the purpose there.
I'm trying to think of a way to make the design process of the Modular MkIII as easy to comprehend as possible, and not really succeeding. I guess when you have at least four different addon sets for a given core design, that may or may not have interchangeable or intercompatible parts, things tend to get a little confusing. I'll figure it out later, there's still lots of stuff to work on and Anton is quite a ways away from having a MkIII in any case. ))
Anton sat back in the virtual chair. Despite a few hitches and failures, his designs mostly worked. "Mostly". Ugh, that brought back bad memories. Anton shrugged the bad thoughts off and tried to lose himself in the design process again. Saving and closing all other projects, he focused on what he suspected could be the best immediate addition to the arsenal. He realized that nobody would give it to him for free, and he'd have to pay for and do everything himself to be able to really put it to the test in the field, but personal gain had never been the primary cause behind his inventions. If it could further the war effort, and save a few innocent (or, he thought as he considered the HMRC, "less immediately guilty") lives to offset those his previous "invention" took with itself, then he had all the reward he needed.
Save and close all projects except the Gungnir. Lock and password-protect the incomplete Token and Modular suit projects.
Conduct testing of the bayonet-configuration electrolaser rifle to determine effects of the combined laser and electrical discharge on targets. Both laser and saber on standard settings, single 5s pulse, medium-short range. ((i.e. about 90m IIRC)) Test against: Human in casual clothing, MkI, MkII, and MkIII suits. Test against supercrete wall and steel bulkhead.
Repeat test with laser set to minimum power, and range reduced to short.
Repeat test with both laser and saber at minimal power, only against humans with and without the different suits. (tazer test)
Since the bayonet design was the only one that worked, begin working on a custom mount for the Laser Rifle, so that any standard Tesla Saber can be used if the modified Rifle is purchased. The mount should mechanically connect the intensity knob to where the user can easily reach it on the rifle, as well as give the user a thumb button to activate the tesla saber on the rifle grip. Modify the stock of the rifle to work as a handle, allowing to wield the rifle like a two-handed sword or scythe (one hand on the perpendicular grip, another on the extended stock). See if it's possible to let the custom mount leave the saber's handle exposed, to allow wielding the rifle like a spear (two parallel grips) as well, so that the name Gungnir is more appropriate.
Assuming the design still functions after all modifications, save it and enter Duel. Set up Anton and two copies of him (stat-wise) in MkIIs, armed with Gungnirs, against two average humans in MkIIs, and some sort of robotic infantry (a-la Jim, but Anton never met him and, presumably, isn't aware that full-body cyber-prostheses are possible), all armed with standard Laser Rifles and Tesla Sabers. War-torn urban environment, with standard atmosphere and normal weather. Teams start in cover, 100m apart, but aware of the presence of others.
"Okay, let's see if the whole is better than the sum of its parts."
Start simulation.
((edit: I suppose it's prudent to clarify how to operate the rifle - aim, fire laser, thumb saber switch, in that order. Doing otherwise may result in the electrolaser misfiring and just forming the saber bayonet, since the arc may not jump to the laser's plasma channel if it's already found its own.))
When it comes to the effects of the laser taser, it's basically gonna be the same as a normal laser but also with the added effect of electrocuting it's target.
A mount for this thing isn't really an issue, you could ducttape it on and it would work.
As per this battle you have set up here, you want it all described and rolled out or you just want a quick breakdown?
Go to the Recreation & Mess Hall, and see what's going on there.
Also, test out pyrokinetic abilities: preferably without burning self, or anyone else.
Chaz'll have to learn the layout of the whole place, so he may as well start there. And a little practice with his Amp won't hurt anyone, will it?
You head to the wrec room/mess hall and look around. Greater demon in the corner, guys on vr machines, guys watching tv. Fairly normal. Now, to test out your new powers. hmm, exactly how do you want to do that? Just going off without an exact plan could end up very....Fun.
Test the weakest, highest, and medium strength filaments for comparative cutting power on a MK III suit.
Also, can stronger filaments be used to make longer blades?
The weakest, under best conditions, cuts through the MK III without any resistance at all. You literally feel nothing, it's like cutting air. However, if you don't cut perfectly, the wire will snap. Medium is the standard, which has a bit of trouble with the exoskeleton but works fine. And the heaviest throws a hell of a lot of sparks and takes a good 5-6 seconds to get through the exoskeleton.
And yep.
((Oh...))
Remove the vibrator motor.
Replace monoatomic wire with a stronger material and cheaper if available.
Save.
Create a small high pressure flamethrower at the end of the barrel add electrodes that generate extremely high temparature plasma that will ionise the flames also add
a buffed up handlaser allowing use of a laser or a ionised flame blast.
Add fuel cable inside the outer layers of the suit that connects to a small backmounted compressor and fuel tank to fuel it
Test against most common forms of armour with both laser and flamethrower fire type
Ionized fire?
You're trying to cast a spell on me aren't you, science wizard?
"A gun suitable for both area denial and limited suppressive fire that can also be used by a point-man in a manner that would allow them to clear corners while exposing themselves as less as possible."
>Sounds reasonable. I suppose you want prototyping rights?((For real. Real for VR anyway.))
Do as was said before.
[dex:6]
[Bot dex:1]
[str:2+1]
[bot end:6]
You cut a superficial wound into mr.robutt's throat area.
Search for: ((Recent news) or (Breaking news)) and (Unknown object on course for occupied space)
The highest rated link you find is "Unknown object, possibly space jesus, on way to human controlled space."
It's probably not that...
Wake up.
"I DID NOT HIT HER, I DID NOOOT! Oh, hi consciousness."
((More "fanart":
I guess that's a MkIII... I seem to be thinking too much Gundam in terms of "spacesuit".
ninja edit: Hm, maybe. I don't use cleverbot normally, but I might, for that purpose. I've been feeding different quotes through the bad translator already, that quote just got the most random results so far. I'm gonna trawl the threads for neat quotes and subject them to all the text-mangling insanity I can muster up, including my Travesty Generator. That should be fun.
edit: also, I vote the little girl in the VR "Punch Many Things" program to be named Shabu Shabu.
edit2: reading the thread, finally got to the bit I assume piecewise meant when he said PyroDesu is an "expert on these things". It seems an electrolaser idea wasn't so original here after all. Oh well. I hope to be the first to actually build one though. We need more weird weapons around here. ^_^))
(because weird is what we have a deficiency of around here. )
Also, That's some awesome fan arts. Gonna have to stick that in the OP. Would greatly appreciate more! Also, if you're curious, This
Is what the MK III kind of looks like in my head.
((Uh. Sorry for the absence.
@PyroDesu Good, good. Now I hope they'll last quite longer than the normal ones while offering comparable performance - and thus I sincirely wish you luck with that project. Having a functioning fission device on your back never hurts - well, except those times when it gets hit or is malfunctioning, but it's not that the regular rocket pods can handle those much better.
@Sean Awesome art, and good luck with your tinkering!))
I presume that the Doctor is in charge here, right? Are all other doctors equal before him, or does some sort of hierarchy exist? If so, who are directly under the Doctor in this organisational structure? And is anyone on the staff outside that hierarchy?
"It goes something like this. The doctor and then everyone one else. Its a simple hierarchy, we're all just drones."